EVOLOX® Poly-Axial Locking

N2 (UK) Ltd are the designers, patent holders and manufacturers of the Evolox Poly-Axial locking system.

  • 2.4mm EVOLOX® Cuttable & Cuttable Maleable Plates

    2.4mm EVOLOX® Cuttable & Cuttable Maleable Plates (2)

    The Cuttable locking plates are designed to give the surgeon poly-axial locking while still being able to trim the plate to achieve as many fixation points as possible. If substantial contouring is required then the Malleable plate is the choice. Will accept the following screws. 2.4mm Cortical 2.2mm Cancellous 2.4mm Locking (Hex or/and Star Torx Drive)
  • 3.5mm EVOLOX® Biological Healing Plates

    3.5mm EVOLOX® Biological Healing Plates (4)

    Biological healing plates but with the advantage of poly-axial locking. Plates will accept screws: 3.5mm Cortical / 4.0mm Cancellous / 3.5mm Locking
  • 2.7mm EVOLOX® Osteosynthesis Plates

    2.7mm EVOLOX® Osteosynthesis Plates (13)

    This plate is designed to give the surgeon the freedom of poly-axial locking up to 20 degrees inclusive while still being able to contour the plate. This is achieved by protecting the hole with a locking plug (see locking screws) which then forces the deformed metal into the designed crumple zones (patent pending). Contouring can be in the form of 2 way axial bend or twist. These plates have numerous applications, hence the name Osteosynthesis Plate. Plates will accept screw sizes: 2.7mm Cortical / 3.0mm Cancellous / 2.4mm-2.7mm Locking
  • 3.5mm EVOLOX® Broad Plates

    3.5mm EVOLOX® Broad Plates (15)

    This plate is designed for heavy breeds, being 2mm wider and approximately 25% stiffer than the standard 3mm plate. Poly-axial locking up to 20 degrees inclusive is achievable while still being able to contour the plate. This is achieved by protecting the hole with a locking plug (see locking screws) which then forces the deformed metal into the designed crumple zones (patent pending) Contouring can be in the form of 2 way axial bend or twist. These plates have numerous applications, hence the name Osteosynthesis Plate. Plates will accept screw sizes: 3.5mm Cortical / 3.5mm Locking
  • 3.5mm EVOLOX® Osteosynthesis Plates

    3.5mm EVOLOX® Osteosynthesis Plates (17)

    This plate is designed to give the surgeon the freedom of poly-axial locking up to 20 degrees inclusive while still being able to contour the plate. This is achieved by protecting the hole with a locking plug (see locking screws) which then forces the deformed metal into the designed crumple zones (patent pending) Contouring can be in the form of 2 way axial bend or twist. These plates have numerous applications, hence the name Osteosynthesis Plate. These plates will accept screw sizes: 3.5mm Cortical / 4.0mm Cancellous / 3.5mm Locking
  • 3.5mm PCL EVOLOX® (Poly-axial Compression Locking Plate)

    3.5mm PCL EVOLOX® (Poly-axial Compression Locking Plate) (11)

    A dedicated heavy duty plate for long Bone fractures requiring minimal contouring but maximum strength. Key points: Extruded contoured profile for increased stiffness Single cortical screw location fixing Dual 3.5mm cortical compression Multiple Poly-Axial locking to stabilize fracture Will accept: 3.5mm Cortical, 4mm Cancellous 3.5m Locking (Hex or/and Star Torx Drive)
  • EVOLOX® GEN2 Acetabular

    EVOLOX® GEN2 Acetabular (4)

    Acetabular plates that use Gen2 style EVOLOX® poly-axial locking.
  • EVOLOX® TPLO

    EVOLOX® TPLO (14)

  • EVOLOX® GEN2 Hybrid T-Plates

    EVOLOX® GEN2 Hybrid T-Plates (2)

    Hybrid T-Plates using a combination of poly-axial locking and DCP holes. Coding: EV-HTP-(Head hole size)-(Shaft hole size)-(Plate length)

Spend over £150 and pay by card online and receive a 10% basket discount by using coupon code: OCP10