Bone Plates (Stainless)

All of our plates are manufactured in the UK using Stainless Steel 316 LVM ISO 5832-1 ASTM F138/F139
316LVM is Low Vacuum Melted to achieve high levels of purity, reduced inclusions, and reduced delta ferrite particles.

We Satin Finish our plates giving the following advantages.

• lack of annoying light reflection during surgery.
• Creates a uniform surface layer of compressive stress, which acts to combat stress cracks and corrosion, therefore, increasing the life of
implant.
• Greater ultrasound reflection.
• Cleaner part, free from residues with a low CFU (microorganism) count, resulting in easier autoclave sterilisation.

  • Acetabular Plate

    Acetabular Plate (11)

    These plates were specifically designed for the stabilisation of acetabular fractures in dogs. The pre-contoured shape simplifies the contouring to the dorsal acetabular surface which facilitates accurate reduction of acetabular fractures. Seven sizes to suit screw ranges from 2.0mm/2.4mm/2.7mm and 3.5mm. Holes are standard round. Stainless Steel ISO 5832-1
  • Buttress Bridge Plates (Biological Healing Plates)

    Buttress Bridge Plates (Biological Healing Plates) (27)

    Biological Healing Plates (Buttress Bridge Plates) 2.0mm/2.7mm is 8mm wide by 2mm Thick. 3.5mm are 10.2mm wide by 3.2mm Thick Pre-contoured Profile. 4.5mm are 12mm by 4.0mm Thick Pre-Contoured Profile. A plate that prevents axial deformity or deviation as a result of shearing or bending forces (central portion of plate has no screw holes to increase plate strength). They are also used to splint or bridge a fracture area to maintain the length of the bone. They can be used in conjunction with lag screws and can maintain alignment of highly comminute segments of bone (a fracture in which the bone is splintered or crushed into numerous pieces). Gaps in the bone may be present. When gaps are present, the plate with this type of fixation is subject to full loading. Therefore, every possible effort should be made to maintain soft tissue attachments and blood supply to the comminute fragments since union will depend on the formation of a callus bridge and not direct healing of the bone.
  • Cranial Pantarsal Arthrodesis Plate (Canine)

    Cranial Pantarsal Arthrodesis Plate (Canine) (2)

    3.5mm/2.7mm Pre contoured to 135° to reduce stress risers. Profile 12mm X 4 mm for added strength. 140° 2.0/2.4/2.7mm Pre contoured to 140° to reduce stress risers. Profile 8mm X 2.5mm for added strength. 140° An improved plate with increased screw placement angulation in elliptical slots similar in design of Limited contact slots. The oblique undercut for improved range of inclination either side of the bend greatly improves screw placement to secure the talus. New range has the added advantage of reduce profile height to aid closure without affecting torsional strength. Larger compression slots in the Tibia than the metatarsal and tapered to suit.
  • Compression Plates

    Compression Plates (131)

    Self-compressing plates that achieve axial compression of the fracture site by combining screw hole geometry with screw insertion. Screws can be inserted off centre to the dcp slot so that when tightened the head will glide down the ramped slot displacing the plate away from the fracture, resulting in compression. They can adapt to many different internal fixation situations and function as a dynamic compression plate, a neutralization plate, or be used in bridging fashion as a lengthening plate. Use with ISO standard Cortical Bone Screws with spherical head.
  • Cuttable Plates

    Cuttable Plates (8)

    Veterinary Cuttable plates are used for internal fixation of long bone fractures in small dogs and cats and for smaller fracture procedures in larger breeds of dogs. Case studies have also been successful and widely accepted in repair of the metacarpals and metatarsals.
  • Cuttable/Maleable Plates

    Cuttable/Maleable Plates (2)

    Veterinary Cuttable plates are used for internal fixation of long bone fractures in small dogs and cats and for smaller fracture procedures in larger breeds of dogs. Case studies have also been successful and widely accepted in repair of the metacarpals and metatarsals. The Grooved Styled plates lends itself well to three dimensional contouring like a reconstruction plate.
  • Cuttable Plates (Broad)

    Cuttable Plates (Broad) (10)

    Cuttable broad plates are used for internal fixation of long bone fractures in small dogs and cats and for smaller fracture procedures in larger breeds of dogs. The broad plate provides addition strength over the standard plate. Case studies have also been successful and widely accepted in repair of the metacarpals and metatarsals.
  • Distal Radius Plates

    Distal Radius Plates (15)

    Distal Radius Plates are available in sizes 2.0mm 2.7mm 3.5mm Shape is either oblique left/right or T
  • Cranial Pantarsal Plate (Feline)

    Cranial Pantarsal Plate (Feline) (3)

    2.0mm/2.0mm Dimensions are 5mm wide by 2mm thick, tapering to 1.5mm pre bent at 120° to reduce stress risers. 2.0mm/2.4mm Dimensions are 6.5mm wide by 2mm thick, tapering to 1.5mm pre bent at 120° to reduce stress risers. 2.0mm/2.0mm Dimensions are 8mm wide by 2mm thick, tapering to 1.5mm pre bent at 120° to reduce stress risers. Larger compression slots in the Tibia than the metatarsal and tapered to suit.
  • H-Plates

    H-Plates (2)

  • Hybrid T Plates

    Hybrid T Plates (21)

    This comprehensive range of plates helps to overcome the limitations for screw placement in distal radius fractures. The plate head has smaller diameter round holes that are spaced closer together than in the plate shaft, and is anatomically contoured along its length. Sizes range from 1.5mm to 3.5mm
  • Intertarsal Arthrodesis Plate

    Intertarsal Arthrodesis Plate (2)

    Designed to fuse the bones of the calcaneoquartal or tarsometatarsal joints in a functional position due to injury of the plantar tarsal fibrocartilage.
  • Limited Contact Plates

    Limited Contact Plates (60)

    LCP plates are used in the same manner as the DCP, but have grooves (undercuts) on the underside of the plate. These undercuts allow for easier bending of the plate between the screw holes when contouring. They also decrease the chance of plate failure because forces are more evenly distributed throughout the plate. In addition, they help to reduce plate to bone contact area thus aiding the prevention of vascular trauma. Unlike the standard DCP screw slot uni-directional movement, the LC-DCPs are designed to compress in both directions. By design, the screw holes have an oblique undercut for improved range of inclination.
  • Pancarpal Arthrodesis Plates Round Holes

    Pancarpal Arthrodesis Plates Round Holes (4)

    PCA plates are used to treat subluxations or luxations of the middle carpal and carpometacarpal joints which are associated with disruption of the accessory carpal ligaments, palmar fibrocartilage and palmar ligaments. Sizes range from 1.5mm to to a heavy duty 4.5mm Cortical Screw. Round holes for neutral stabilisation.
  • Pancarpal Arthrodesis Plates DCP Style

    Pancarpal Arthrodesis Plates DCP Style (15)

    PCA plates are used to treat subluxations or luxations of the middle carpal and carpometacarpal joints which are associated with disruption of the accessory carpal ligaments, palmar fibrocartilage and palmar ligaments. Sizes range from 1.5mm to to a heavy duty 4.5mm Cortical Screw. DCP slots for compression.
  • Pantarsal Arthrodesis Plates

    Pantarsal Arthrodesis Plates (18)

    Arthrodesis is an elective surgical procedure to eliminate motion in a joint by providing a bony fusion. The procedure is used for several specific purposes: Relieve pain; to provide stability Overcome postural deformity resulting from neurologic deficit Halt advancing disease. Designed in Canine (135°) and in Feline (120°) for a functional position. All Plates are made from Stainless Steel ISO 5832-1
  • Partial Carpal Arthordesis Plate

    Partial Carpal Arthordesis Plate (3)

    Is used to treat subluxation of the carpometacarpal joint occurring without disruption and displacement of the accessory carpal and ulna carpal bones. Three sizes available with a 5 degree incline on the head of the reduced sized head. All Plates are made from Stainless Steel ISO 5832-1
  • Reconstruction Plates

    Reconstruction Plates (15)

    RCP plates are available in 2 sizes on 2.7mm and 3.5mm. Specifically designed for easy three dimensional contouring but not exceeding more than 15 degrees in any one direction. The plate’s stiffness is reduced by bending and if a strong curvature is needed, a pre-contoured plate should be ordered. The longer plate lengths can be cut to size and we offer intermediate odd hole sizes. Commonly used for stabilization of pelvic fractures. These plates are not designed to withstand the forces of weight bearing.
  • Round Hole Plates

    Round Hole Plates (64)

    An economical range of non-compression bone plate. Available in sizes 2.0mm to 3.5mm Broad and Regular. Can be used with standard cortical or sherman screws.
  • Supracondylar & Osteotomy (Distal Femur) Plates

    Supracondylar & Osteotomy (Distal Femur) Plates (14)

    Available in screw sizes 2.0mm to 3.5mm with various lengths to suit. Multiple compression slots and pre-contoured for convenience. If further contouring is required it is recommended that a bending template is used as a guide, to avoid secondary bending.
  • Supracondylar Osteotomy Plates

    Supracondylar Osteotomy Plates (10)

    The SCO plates differ from the SUP plates as they have a bridge gap between shaft and head holes.
  • TPLO Compression Plates

    TPLO Compression Plates (17)

    Tibial Plateau Levelling Osteotomy This technique strives to alter the naturally-occurring downward slope (angle) of the tibial plateau. Because of this slope, the femur, which rests upon the tibial plateau, has a tendency to push the tibia forward; normally the CCL acts to restrain this thrust but cannot adequately stabilize the stifle joint when injured or torn. This biomechanical fixation procedure is designed to eliminate tibial thrust using screws and Plates. All size screws from 2.0mm to 6.5mm are covered within the range. Various lengths and pre-contouring to enhance a popular choice for TPLO surgery.
  • TPLO Delta 'Style' Plates

    TPLO Delta 'Style' Plates (14)

    Tibial Plateau Levelling Osteotomy Pre-contoured TPLO Delta shaped plates available in sizes from 2.0mm to 3.5mm Broad and Regular.
  • TPLO Slocum 'Style' Plates

    TPLO Slocum 'Style' Plates (10)

    Tibial Plateau Levelling Osteotomy Available in four sizes (2.4mm,2.7mm,3.5mm and 3.5mm Pre-contoured) and both Left and Right Hands. Pre-Contoured and a notched underside to aid final contouring. Not from Cast or Forging All Plates are made from Stainless Steel ISO 5832-1
  • TPO EQ Plates

    TPO EQ Plates (6)

  • Tubular Plates

    Tubular Plates (16)

    Straight tubular plates have a radial contour to fit closer to the bone. They offer high rigidity at an economical price. Available in sizes 2.0mm 2.7mm 3.5mm Bending of these plates is not recomended.

Spend over £150 and pay by card online and receive a 10% basket discount by using coupon code: OCP10